Laser cut boxes with lift on lid
Here we have an instruction video and step by step photo guide on how to put our flat pack boxes together
YOU WILL NEED
WOOD GLUE is available HERE
You will notice that the 2 base pieces are different sizes - see below
The larger piece is for the LID
The smaller piece is for the BOX
Next check your fit before gluing
Base
Lid
CORNER JOINS
In each corner you will have a small rectangle and a large square as below
Glue all the lower teethed sections on every side of all the box and lid pieces and pull them up to join together.
Once done wipe off any excess glue, apply masking tape and leave to dry
Repeat the same for the lid
Once dry your box is complete!
BOX 3 - 300mm x 200mm x 200mm
we also do other sizes
BOX 1 - 200mm x 200mm x 200mm
BOX 2 - 300mm x 200mm x 100mm
BOX 4 - 400mm x 300mm x 200mm
Links to order the boxes and wood glue are available below
we also do themed framed toppers to fit on these boxes HERE
We also do wording toppers HERE
for all occasions and if you don't see one you want we can also design ones for you!
Thank you for reading we hope you found this useful. Please leave a comment below xx
S